Windows ping utility

There are many different implementions of this floating around, written independently by different people. There are many like it, but this one is mine.

I have a tcp traceroute now too.

Simple Ping Tool

May Note: I am depreciating my old download location in favor of download. New versions will be signed, hashed and compiled on a dedicated dev machine. Eli Fulkerson. Note that the travel time for the last ACK is not included - only the time it takes to be put on the wire a tthe sending end.

The travel time of the outgoing final ACK is not included, only the minimal amount of time it has taken to drop it on the wire at the near end. Default 4. Default 1. Decimals permitted. Default 2. If a host was up, but now its not, beep. If a host was down, but now its up, beep. If a host was one way, but now its the other, beep.

Jitter is defined as the difference between the last response time and the historical average. Windows can still not be depended upon to have a useful command line environment. That file becomes a source of destinations, looped through on a line by line basis. Some options don't work in this mode and statistics will not be kept. Also do not specify server port via ":port" syntax. If not specified, defaults to Header is implied if using --tee.

Defaults to License is in source, tl;dr - use for anything; as-is-no-guarantees; don't remove attribution.Here is a list of best free ping monitoring tools for Windows.

These software allow you to check whether the connection with a host is stable or not. To check the connection stability, these software ping their hosts and check their responses. According to obtained responses, these tools determine network stability and host status active or inactive.

These software also show various data regarding the ping to help you perform ping monitoring. Some of these software also allow you to monitor multiple hosts at a time.

windows ping utility

Before starting the ping monitoring, you need to configure these ping monitoring tools. In the configuration, you need to specify the hostname www. Besides this, in some tools, you can also specify the ping packet size, ping timeout, ping frequency, etc. After all the configurations, you can start the ping monitoring process.

ping utility

When you initiate the ping monitoring process, these ping monitoring software start sending the ping to specified hosts at specified intervals. Now, you can observe all the important data and graph showing the ping response time, host uptime, number of lost ping, round trip time, TTL, etc.

windows ping utility

However, all of these software do not provide detailed ping monitoring data and only show connection status with the host. A few of these software can also generate alert messages and emails in case of dropped connection with a host. Go through the list to know more about these ping monitoring tools. Ping Monster is my favorite software because it provides important ping monitoring data and it can connect with multiple hosts.

I also like its email alert feature that automatically sends you an email alert in case of dropped connection with the host. Ping Monster is a free ping monitoring tool for Windows. It is a simple ping monitoring tool that allows you to ping multiple hosts or websites at a time. Not only it can ping multiple hosts, but it also lets you monitor ping status in real time like ping time, response time, etc. Before starting the ping sending and ping monitoring process, you need to configure this software.

You can use its Config section to do that. Apart from setting up the host, you can also set sound and email alert in case of some connection error, using its Config section. It is a great ping monitoring software that shows you important ping monitoring data in real time. Visual Ping monitor is another free ping monitoring tool for Windows. With the use of this software, you can send ping to three hosts at a time and track their responses.

The main aim of this tool is to compare the ping response times of three different hosts. However, you can also manually add a lot of host websites in it and switch between them. Apart from response time, this tool also shows the ping speed of different host websites. It is a powerful ping monitoring software that allows you to monitor multiple hosts at a time.Nping is an open source tool for network packet generation, response analysis and response time measurement.

Nping can generate network packets for a wide range of protocols, allowing users full control over protocol headers. While Nping can be used as a simple ping utility to detect active hosts, it can also be used as a raw packet generator for network stack stress testing, ARP poisoning, Denial of Service attacks, route tracing, etc. Nping's novel echo mode lets users see how packets change in transit between the source and destination hosts.

That's a great way to understand firewall rules, detect packet corruption, and more. Nping has a very flexible and powerful command-line interface that grants users full control over generated packets. Nping's features include:. Source code can be downloaded there as well. For the very latest code, checkout Nmap from our SVN repository Nping-specific code is in the nping subdirectory as described here. Use the normal steps to compile Nmap and Nping will be compiled along with it.

Patches, Bug Reports, Questions, Suggestions, etc Questions, comments and bug reports are always welcome. Please use the Nmap development mailing list nmap-dev.

Code patches to fix bugs are even better than bug reports. If you wish to contribute code to Nping, we have a todo list of features we would like to have. There are also some instructions for creating patch files and sending them, here. For contact information, please visit section "Authors" in the man page.Main Page.

PingInfoView v2. It automatically ping to all hosts every number of seconds that you specify, and displays the number of succeed and failed pings, as well as the average ping time.

ping (networking utility)

Older versions of Windows are not supported. Versions History Version 2. Version 2. You can now specify the host name or IP address with a port number e. Version 1. Fixed bug: When the lower pane option was turned off, PingInfoView didn't add the pings to the log file. Added new option in 'Advanced Options' window: 'Limit the total number of accumulated pings' Default is If you run PingInfoView for long period of time, you should use this option.

Otherwise, the accumuated ping result will consume a lot of memory, and eventually PingInfoView will respond very slowly or crash. Added 'Window Title' field. The text you type here will appear in the title of the main window. Added option to execute a command on ping failure.

Added 'Consecutive Failed Count' column. Added option to add all ping results or only the failed pings into a comma-delimited or tab-delimited log file In 'Advanced Options' window.

Added option to stop adding the ping results into the lower pane In 'Advanced Options' window. It's recommended to use this option if you have large amount of pings, because the accumulation of ping results consumes a lot of memory and eventually causes PingInfoView to crash. Added 'Order' column, which specifies the original order of hosts, as you typed in the 'Ping Options' window. The default value is Improved the ability of PingInfoView to handle hundreds or thousants of IP addresses in the same time.

Fixed issue: The properties and the options windows opened in the wrong monitor, on multi-monitors system. You can disable this feature by unchecking the 'Show Lower Pane' option under the Options menu Version 1.

windows ping utility

PingInfoView now check the pinging status, and if the pings stoped from some reason, PingInfoView should start them again. Fixed some problems with the xml file. New column: Last Failed On.

New option: Beep On Failed Pings. New option: Put Icon On Tray.Ping is a command-line utility, available on virtually any operating system with network connectivity, that acts as a test to see if a networked device is reachable.

The ping command sends a request over the network to a specific device. A successful ping results in a response from the computer that was pinged back to the originating computer. According to the author, the name Ping comes from sonar terminology. In sonar, a ping is an audible sound wave sent out to find an object.

If the sound hits the object, the sound waves will reflect, or echo, back to the source. The distance and location of the object can be determined by measuring the time and direction of the returning sound wave.

Similarly, the ping command sends out an echo request. If it finds the target system, the remote host sends back an echo reply. The distance number of hops to the remote system can be determined from the reply, as well as the conditions in-between packet loss and time to respond.

While the author of the ping utility said the name of the program was simply based on the sound of sonar, others sometimes say that Ping is an acronym for Packet InterNet Groper. When a ping command is issued, an echo request packet is sent to the address specified. When the remote host receives the echo request, it responds with an echo reply packet.

fping vs ping

By default, the ping command sends several echo requests, typically four or five. The result of each echo request is displayed, showing whether the request received a successful response, how many bytes were received in response, the Time to Live TTLand how long the response took to receive, along with statistics about packet loss and round trip times. The ping utility has been incorporated into virtually every operating system with network support. While echo request and echo reply are ICMP messages, the exact implementation of the Ping utility varies slightly among manufacturers.

In its simplest form, the ping utility can be run with nothing more than the ping command and a destination. The remote host can be specified either by name or address. There are numerous switches available for the ping command that allow the default settings to be customized for more specific purposes. Unfortunately, there is no consistency across platforms for the different switches. For example, Windows uses a -n number to set how many pings to send, while most Unix systems use a -c count.

Here are some examples of ping command switches. Generally, using ping -? Number or count — sets the number of echo requests, or pings, to be sent.

By default, this number is four on most Windows systems, and five on most Unix systems.But hey, can I use port 80 with integrated Windows ping utility? Other great tool for TCP pinging is hping. When it comes to measuring bandwidth, also check iperf command line utility. Nemanja is an engineer of computer science, Tech guru and computer addict with more than 5 years of experience in Windows and Linux administration. In his free time he likes to write tech articles, master his English and German language skills, play heavy riffs on his guitar, and spend time with his family.

He is diligent, easygoing and open-minded. Contact me via soul. Now Trending: Schedule database backup Automated WordPress Inst Advanced Taskbar System Boost WordPress Speed an If you like this article, please share it. Fil Summary.

windows ping utility

Related Posts How to measure bandwidth between two computers on the same network No Comments Apr 26, No Comments Sep 30, No Comments Nov 2, No Comments Sep 15, About The Author Fil Nemanja is an engineer of computer science, Tech guru and computer addict with more than 5 years of experience in Windows and Linux administration.

About Us Contact Privacy Policy.Routinely conducting ping sweeps has a variety of benefits. Pinging informs IT professionals about the state of their network: the availability status of all devices, latency rate of network requests, percentage of data packet loss, and more. What is Ping? The ping utility is a basic but integral feature in network management—it monitors device availability, network latency, and packet loss within a network. Most network administrators are more than familiar with the ping utility.

An admin can send a single ping to verify the status of an IP address, or they can execute a ping sweep, contacting a breadth of addresses perhaps even all the addresses within a network to get a holistic view of network device availability.

Ping, a program authored in by Mike Muussoperates analogously to a sonar using echolocation. When the host that sent out the ping receives the pong, it can calculate the network latency, either by timing the rate of data transfer or by clocking the gap between the outbound ping transmission and the inbound pong transmission much in the way a bat can gauge the distance of an object based on the reflection of its emitted sound waves.

Pings are fundamental to network integrity, but the IP ping utility serves a fairly simple function: host lookup. Ping helps ensure host availability through the echo request and echo reply ICMP message codes. Most operating systems OS have native ping software admins can execute from the command line. These results will help you infer a variety of things.

If ping returns no lost data, then you can reasonably trust your connection is secure, and the IP address is online. And if the request times out, there are a few potential explanations: the pinged IP address is wrong and might not exist; the IP address belongs to a device with settings preventing it from responding to pings; or the IP address is offline. The best ping tools are bundled within network management toolsets to provide a full range of network performance monitoring and management capabilities.

These tools leverage ping data to determine device availability, follow latency and assess overall network health. In terms of scope, granularity, precision, and visualization, it has no competitors: it automates continuous monitoring across a network and easily generates informative graphical representations that enhance ping data. However, the ping tool aligned with your organizational needs will depend on network type and budget.

As a ping discovery tool, it automatically recognizes and tracks every device on the network. The Enhanced Ping capability quickly produces graphs, expediting troubleshooting by visualizing response time fluctuations against ping timestamps. By getting an instant idea of which IP addresses are active and which are unused, you can avoid IP address duplication and network collisions. With Proxy Ping, admins can execute a ping test from a remote site to test the latency between the remote location and the main office or between two remote sites.

This greatly simplifies network management and remote administration, consolidating storage usage data, device availability, load statistics, latency information, and network topology mapping. You can try it out yourself during a free fully functional day trial before putting any money down. IPAM is simultaneously powerful and detailed.

Its IP address scanner automates scans to keep tabs on available addresses and is highly configurable, making it possible to create new subnets and schedule routine scans. Further, its ICMP ping sweep function can ping an entire network or specified subnets so admins have real-time, continuously culled data. Its best feature, however, is not the ICMP ping sweep—which any number of software can perform—but its coordination with other network management functions, making it possible to get reliable snapshots of any network, no matter how complex.

It can streamline processes across remote and hybridized environments that would be impossible to combine manually, so admins can verify an address is available, provision it, and ensure DNS is updated with the new reservation by managing its entries. Angry IP Scanner has the functionality of an IP address scanner and network ping tool in a command-line interface, deploying across OS types. After a user inputs the IP address range, the scanner outputs active IP addresses, DNS names, ping data, MAC address, and port count, all of which can be exported in a variety of formats to support reporting.

While certainly functional across network types and sizes, Angry IP Scanner is freeware probably best suited to a smaller organization, as a larger enterprise will require more tracking to organize data and glean useful information from ping output.

Paessler PRTG is a complete network monitoring solution, capable of tracking network bandwidth, database activity, application health, cloud computing services, server reliability, and more.


Replies to “Windows ping utility”

Leave a Reply

Your email address will not be published. Required fields are marked *